Instrument Engineering Intermediate


At foundation level, this course is an overview of industrial measurement and control for technicians, engineers, and managers. It provides the basic understanding and foundation for communication with other control systems professionals.

At intermediate level, some modules will provide experience I&C engineers the advanced knowledge and specific skills for Instrument engineering.

The objectives of this course are as below but not limit to:

Intermediate level ( module 7-10 )

  • Control valve, regulator and relief valves
  • Safety instrumented Level basics
  • Hazardous classification basics


Safe-use and application of electrical equipment

Hazadous area classification:

  • General concept
  • Ex d, e, ia, ib, ect.

Define the classification of an instrument

Fundamental of Process safety and Safety Instrumented System

  • Prescriptive vs risk-based approach in standards, introduce IEC61511
  • Introduce SIF and SIL

Fire and Gas detection

  • Fire detection
  • Smoke detection
  • F&G voting philosophy.
  • Relevant standards

Power supply for instrumentation and Grounding

1-3 years of experience I&C engineers, technicians who wants to understand the extension safety concepts widely used in Oil and Gas industry

4 hours


Control Valves


Valve Characteristics

Inherent Flow Characteristics


Air to Extend/Retract


I/P Transducer

Control valve sizing

Pressure relief valves and Pressure Regulators

Fresh I&C engineers, technician.

Or I&C engineers who wish to know more about control valve/ PSV and PRV

4 hours


Feedback Control Strategies

Control Hierarchy

Process Dynamics


Dead Time


Direct/Reverse Acting

On-Off Control

Controller Modes

Proportional Control/Action

Level Control Offset

Integral and Derivative Action


I&C engineer who works with control loops and control system in manufacturing environments

8 hours


Advanced Control Strategies

Control Hierarchy

Cascade Control

Applications: With and Without Cascade

Ratio Control

Feedforward Control

Experienced I&C engineers who work with control system and control loops in manufacturing environments

8 hours

Nếu bạn thực sự nghiêm túc về việc sử dụng thành thạo phần mềm, và nếu bạn muốn tham gia vào lớp học, hãy bấm vào nút ĐĂNG KÝ NGAY ở bên dưới. Nếu bạn không muốn dậm chân tại chỗ, hay bỏ quá nhiều thời gian vào việc tự nghiên cứu và tiếc chi phí chỉ 1-2 vài ly cà phê mỗi tháng.


Khóa học 8 buổi, mỗi buổi 3 giờ

Hồ Chí Minh

  • Liên hệ 0906657379

Vũng Tàu

6.000.000 Đ

Đăng kí sớm để được ưu đãi