Giới thiệu
At foundation level, this course is an overview of industrial measurement and control for technicians, engineers, and managers. It provides the basic understanding and foundation for communication with other control systems professionals.
At intermediate level, some modules will provide experience I&C engineers the advanced knowledge and specific skills for Instrument engineering.
Mục tiêu khóa học
The objectives of this course are as below but not limit to:
Intermediate level ( module 7-10 )
- Control valve, regulator and relief valves
- Safety instrumented Level basics
- Hazardous classification basics
Giảng viên
- Trên 7 năm kinh nghiệm trong lĩnh vực đào tạo, giảng dạy cho hàng nghìn kỹ sư đang tốt nghiệp và làm việc trong lĩnh vực kỹ thuật.
- 80% giảng viên là Senior Engineer đang làm việc và nắm giữ vị trí quản lý tại công ty nước ngoài và có yếu tố nước ngoài.
- Có kinh nghiệm thực tế làm qua rất nhiều dự án lớn về thiết kế, vận hành, bảo trì, giám sát các công trình nhà máy, dầu khí, năng lượng, hoá chất, sản xuất.
- Tốt nghiệp các trường Đại học Kỹ thuật hàng đầu trong nước và nước ngoài
- Có kỹ năng sư phạm, tận tâm, hỗ trợ nhiệt tình trong và sau khóa học.
Nội dung chính
7 | Safe-use and application of electrical equipment Hazadous area classification:
Define the classification of an instrument Fundamental of Process safety and Safety Instrumented System
Fire and Gas detection
Power supply for instrumentation and Grounding | 1-3 years of experience I&C engineers, technicians who wants to understand the extension safety concepts widely used in Oil and Gas industry | 4 hours |
8 | Control Valves Types Valve Characteristics Inherent Flow Characteristics Actuators Air to Extend/Retract Positioners I/P Transducer Control valve sizing Pressure relief valves and Pressure Regulators | Fresh I&C engineers, technician. Or I&C engineers who wish to know more about control valve/ PSV and PRV | 4 hours |
9 | Feedback Control Strategies Control Hierarchy Process Dynamics Lags Dead Time Strategies Direct/Reverse Acting On-Off Control Controller Modes Proportional Control/Action Level Control Offset Integral and Derivative Action Tuning | I&C engineer who works with control loops and control system in manufacturing environments | 8 hours |
10 | Advanced Control Strategies Control Hierarchy Cascade Control Applications: With and Without Cascade Ratio Control Feedforward Control | Experienced I&C engineers who work with control system and control loops in manufacturing environments |